3-1/8" ID (3" CTS) x 1/2" Wall, Micro-Lok High Performance Fiberglass Pipe Insulation, 3ft Johns Manville
3-1/8" ID (3" CTS) x 1/2" Wall, Micro-Lok High Performance Fiberglass Pipe Insulation, 3ft
Brand: Johns Manville
Part#: 90006373
Model: FIPC03105AJ
made in usa
Usually ships: Upon availability

Description

For use with 3" nominal (3-1/8" OD) copper (K, L or M types) or CPVC pipe. 1/2" wall thickness, 3ft (36") individual length.
Johns Manville Micro-Lok HP is a USA-made, premium quality fiberglass pipe insulation with reinforced foil & paper laminated all-service jacket (ASJ).
Pre-slit, self-sealing (with adhesive strip), suitable for a wide range of plumbing, heating & other residential, commercial and industrial uses (hot or chilled water, steam, etc.) especially where fire code compliance is needed.

Features:
  • Made in the USA
  • Micro-Lok HP (High Performance) series is a preferred choice of professionals due to exceptional quality, high performance, ease of installation and competitive cost
  • Pre-slit type with ASJ (All Service Jacket) and SSL (Self Sealing Lap) adhesive closure strip
  • Flame-resistant, meets NFPA 90 A & B standards
  • Also an effective acoustic barrier
  • cULus and cETLus listed, NYC MEA approved
  • Moisture vapor permeability rating of <0.02 (as per ASTM C1136 I & II standard), suitable for cold chilled water applications
  • Resists mold and fungi growth (as per ASTM C1338 standard)
  • Will not soften or separate when heat and humidity are high
  • Seals tight to prevent condensation and moisture formation
  • Tested for insulation shrinkage in soaking heat temperatures (ASTM C356)
  • Low VOC (<49 g/L), Formaldehyde-free™, GreenGuard Gold certified product, made with 32% recycled content

Technical Specifications:
  • For Copper Pipe Size (CTS): 3" (PEX; Copper - K, L, M; CPVC)
  • Wall Thickness: 1/2"
  • Total Insulation OD: 4"
  • Insulation ID (max. Outside Diameter of the pipe): 3-1/8"
  • Insulation R-Value: 2.5
  • Material: Fiberglass
  • Length: 3ft
  • Service Temperature Range: 0 - 850°F
  • Thermal Conductivity (K-Value): 0.23 @ 75°F - 0.55 @ 500°F
  • Burst Strength: 55 psi
  • Moisture Absorbtion: <5% by weight
  • For full list of properties, specifications and approvals, see Technical Specifications file under Literature tab.

Documents

Write a Review
Helpful? Yes {{ (2*reviews[i].feedback_helpful) - reviews[i].feedback_count }} No
Verified Purchase
{{ reviews[i].content.title }}
Reply from PexUniverse:
By {{ reviews[i].content.name }} (from {{ reviews[i].content.location }}) on {{ reviews[i].created_at | formatDate }}

FAQs

Ask a Question
{{ f.question }}
Helpful? Yes {{ (2*f.feedback_helpful) - f.feedback_count }} No
By PexUniverse Customer Service on {{ f.answered | formatDate }}

Recently viewed products

Top